Open main menu

Hammeck ENVY-S

rated 4.5 of 5 stars
photo: Hammeck ENVY-S hammock

This is a multi tool of a hammock that can be used year around.

Pros

  • Super comfortable
  • Converts from a winter to a summer hammock in seconds

Cons

  • Not for the ultralight crowd

From the Hammeck Web site.....

The Envy-S is our premium sewn-channel gathered end hammock, complete with the integrated Peekaboo system, a hybrid cover/bugnet. In the cooler months, the Peekaboo can be closed to aid in retaining body heat. Or, it can be cracked if venting is necessary. In warmer weather, the Peekaboo can be opened up to increase airflow without sacrificing insect protection. The Peekaboo is made from black fabric. A separate bugnet is available, if desired.

It is available in Single Layer (SL) and Double Layer (DL). With the DL, there is an opening between the two layers that will allow a sleeping pad to be installed. The Envy-S comes ready to hang with your choice of suspension, fixed length ridge line, and a double-ended stuff sack. Additionally, there is a small stuff sack attached to the ridge line to make stashing the Peekaboo more convenient.

Check out our fabric options here. If we don't have a color you're looking for, we can also order fabric from the vendor of your choice. We recommend Dutchware Gear, DIY Gear Supply, Outdoor Wilderness Fabrics, or Ripstop by the Roll. Additional charges may apply, as well as lead time, so please contact us first.

You may choose fabric type/color, lay direction, suspension (whoopie slings or cinch buckles), and strap color once you add this item to the cart. There is also an optional field for comments.

More Information

All current fabric options have a finished width of 59 inches, except for the 40D ACU Camouflage, which is approximately 64 inches.

Over the past few months I have had the pleasure to meet the Meck family of the Hammeck Company at several group hangs. They are some of the nicest folks you will meet. The whole family is involved in the manufacturing of their hammocks and each has some part in the manufacturing process. MomMeck even gave me some suggestions on how I could do a better job on sewing rolled seams and I need all the suggestions I can get.

After seeing their hammecks, I had been trying to save up the $$ to buy one. Luckily at the Florida Hang in January I won a gift certificate for one of their custom built hammecks. As they were demonstrating their new ENVY S prototypes at the hang, I decided to order one. Since the ENVY S was still a prototype I was willing to wait until the Mecks worked the bugs out of the design.

I am a big guy, 6ft 2 and 275+ lbs, so I got with MomMeck and discussed the fabric options and went with the ACU Camo as it is 64” wide and I need something wider than the 60” most fabrics come in. I also went with a double layer because of my weight and a 11 foot long hammeck as I am more concerned with being comfortable in my hammock over saving a few ounces.

I decided to let MomMeck choose the the fabric and color selection of the top cover (face it, guys, women are better at picking complementing colors). Meckie attended the Frosty Butt Hang a couple of weeks later and showed me a picture of my hammeck...or rather the pieces of fabric that would become my hammeck. A few weeks later I got a package in the mail. As it turns out I got the first production ENVY S.

When I opened up the package I found an ACU Camo double ended stuff sack with the hammock and top cover and a separate bundle that is the bug net. After checking the seams and stitching for flaws (something I do with any new gear I get). I gave up, I could not find a single loose thread and all the seams were straight.

The bug net and top cover are made to zip onto the hammock and are completely removable. For those who are not familiar with the ENVY S, it is a multi tool hammock, It can be used as a plain gathered end hammock with out a bug net or top cover, with a bug net or with the Peekaboo top cover. The Peekaboo top cover can be opened up so it is a partial top cover with a bug net so you can keep the bugs out and still enjoy view and if it cools off, zip the Peekaboo cover back in place while inside the hammeck.

The top cover is not waterproof and is not meant to replace a tarp. MomMeck choose to make the top cover out of Forest Green which IMO really complements the hammock and was a much better choice than what I had thought about going with. The hammock does come with a fixed structural ridge line that does a great job of keeping the bug net and top cover up and out of the way and a small stuff sack attacked to the ridge line to store the Peekaboo cover (or bugnet) in when not in use. The open flap part of the Peekaboo cover does not totally unzip but can also be stored in the stuff sack when it is unzipped.

I went with the cinch buckles and strap suspension as I find the cinch buckles to be the easiest suspension method to use IMO. A whoopie sling option is also available. The Mecks also offer the option to build the hammock so you can lay with your head on the left side and your feet on the right or just the opposite. I went with the head on the left as that is how my BlackBird hammock is made although I could have gone the other way without a problem.

The first night I used the hammock, the temps got to 9 degrees outside and the top cover did a great job of blocking the wind. I have not had any issues with the top cover or bug net being in my face while in the hammock. At a recent hang the top cover did such a good job of keeping the heat inside the hammock I had to open the top cover several times during the night to cool off. This was my first hammock with a top cover so I am still learning how to use it to maximize the venting capabilities.

The Mecks use YKK zippers and use a # 5 coil separating zipper on the Top Cover and a # 3 coil separating zipper for the bug net. I found the zippers very easy to operate and one person trying the hammock commented on how easy the zippers functioned compared to the zippers on his hammock from a different manufacture.

I have added some zipper pulls to the zippers to make them easier to find. A word of caution here. The zippers on the top cover overlap so you need to be careful about adding a zipper pull to the inside zipper as once the outer zipper closes over it, the zipper pull makes it impossible or close to it, to un-zip the outer zipper. I had to use forceps to grab the inner zipper pull cord and pull it out to where I could cut it and open the zipper. I do not consider this to be a design flaw as it demonstrates a close fit which will also keep the creepy crawlies out. As I like zipper pulls on my hammock zippers I will continue to play around with it to see if I can figure something out.

The Mecks do offer videos on on their web site on how to use the hammocks.

All the zippers on the hammock, bug net and Peekaboo cover seemed intimidating at first but after a couple of minutes I found that undoing the different covers and reattaching them was not the issue I thought it might be, Hint....there is a flap on the bug net and Peekaboo cover where the zipper attaches to the main hammock body. This flap goes on the inside of the hammock. The covers attach and detach on the other side of the hammock that you get into.

Weight

  • Hammock, stuff sack, and suspension (without bug net or top cover): 2 lbs 7.8 oz or 1,134 grams
  • Top Cover: 9.7 oz or 276 grams
  • Bug Net: 4.3 oz or 121 grams (including the mesh stuff sack)

 

The final hammock (and top cover weight) will vary based on fabric selection and if DL or SL. The Mecks do have a chart that shows the approximate weight of the different options.

So far I have used the ENVY S with an Arrowhead Jarbidge, Hammock Gear Phoenix, and a UGQ 7/8 Under Quilt with out any problems.

The only issue for me so far is that I have been spoiled by the storage shelf in my BlackBird hammock so I have added a ridge line organizer to the ENVY S to store all my junk. Different hammocks require different adaptions to use.

While using this hammock at the Umstead State Park Hang this past weekend I realized that this hammock is much larger than it looks. While laying in the hammock I can hold my arm straight up and just touch the top of the hammock topcover. Starting thinking that I was truly sleeping in a suspended tent. Also decided that is one extremely comfortable hammock to sleep in. I hated getting out of it in the AM.

Would I recommend this hammock to someone else? Yes. I have used this hammock in my back yard for relaxing and sleeping and at three group hangs. It is a great hammock with lots of features and very well constructed and I look forward to spending many more comfortable nights in.

My only concern is that I am worried that if The Terminator (my wife) gets in it, she may decide she likes it and decide it's her hammock (she did that with a TQ I got one time).


Envy-S-28.jpg
Envy-S-34.jpg

Envy-S-27.jpg

Envy-S-32.jpg

Envy-S-33.jpg

Envy-S-37.jpg

Envy-S-48.jpg

Envy-S-50.jpg

Envy-S-52.jpg

Envy-S-54.jpg

Envy-S-21.jpg

DSCF7300.jpg

Source: I won a custom built hammock from the Hammeck Company in a raffle

Your Review

Where to Buy

Help support this site by making your next gear purchase through one of the links above. Click a link, buy what you need, and the seller will contribute a portion of the purchase price to support Trailspace's independent gear reviews.

You May Like

Specs

Price MSRP: $205.00
Product Details from Hammeck »

Recently on Trailspace

Mountain Hardwear Ghost Whisperer/2 Down Jacket Review

NiteCore NU43 Review