Arc'teryx Beta AR Glove
Where to Buy
Here's what other sites are saying:
Climbing in cold and icy conditions is no time to worry about your hands. Stay strong and confident in the Arc'teryx Beta AR Glove. Fully waterproof and insulated, these gloves also utilize Tri-Dex(TM) Technology which provides the utmost dexterity so you can fully grasp the activity at hand. Waterproof, Snow-shedding, Windproof, Breathable, and Insulated Tri-Dex(TM) Technology-Innovative, three-lobe construction technique used for unparalleled finger dexterity Seam-free fingertips improve dexterity One-hand adjustable drawcords Glove shell and lining incorporate identical shaping, for an unparalled anatomical fit Anatomical shaping for fit and comfort Wide cuffs to fit over gloves Removable wrist leash Leather reinforced palm, thumb and fingers Removable fleece glove liner
Arc'teryx knows you would really rather not have to pull off your gloves to adjust a clip, tighten a buckle, or perform any other winter-sports fine-motor tasks, so they made the Men's Beta AR Glove. It was designed to keep you bone-dry with its waterproof, breathable Gore-Tex Pro membrane, tightly-woven the proprietary N80p-X shell fabric, DWR finish, and fully taped seams. Functionality is given a boost with the supple Lezanova goat leather overlay on the palm and tops of fingers, because it's highly breathable, washable, and doesn't require special leather treatment. Elastic at inside wrist snugs the glove against your hand without requiring adjustment, and the short gauntlet length lets you wear it over or under your jacket cuff so the white stuff stays out. A removable wrist leash allows you pull off the glove without worrying about dropping it. Dexterity was also on the mind of Arc'teryx designers with this glove, so you wouldn't have to pull off the glove every time a buckle or a zipper needs a bit of adjustment. Tri-Dex construction patterns each finger individually for exceptional precision, and smooth, seam-free fingertips let you pick things up without seams getting in the way. The removable liner features a thinner fabric on the palm, you'll be able to put your gear to rights without exposing your fingers to the cold. The liner is made with premium high-loft Polartec Wind Pro on the back and lighter-weight Polartec Thermal on the palm side to balance warmth with maximum dexterity.
On Sale. Free Shipping. Arcteryx Beta AR Glove DECENT FEATURES of the Arcteryx Beta AR Glove N80p-x Gore-Tex Pro 3L waterproof outer shell with leather palm overlay Tri-Dex Technology uses a three-lobe pattern providing exceptional dexterity and a three-dimensional precision touch Short gauntlet fits under or over jacket sleeves Removable fast drying hybrid fleece liner combines Polartec Wind Pro high loft with Thermal Pro Tweed fleece in the palm Self-adjusting elasticized wrist closure secures glove removable leashes The SPECS of the Arcteryx Beta AR Glove Weight: (M): 7.3 oz / 206 g Fit: Athletic e3D N80p-x Gore-Tex Pro 3L outer shell Lezanova palm overlay Polartec Wind Pro high loft (back) Thermal Pro Tweed (palm) fleece hybrid liner This product can only be shipped within the United States. Please don't hate us.
The Arc'teryx Beta AR Tri-Dex Technology waterproof GORE-TEX glove is designed to work in a variety of alpine endeavors. Three-lobe pattern permits individual, three-dimensional shaping of each digit for unprecedented dexterity. Hybrid fleece liner improves dexterity by using two fabrics: low profile tweed weave palms and under fingers; high loft fleece lining to insulate the back of the hand, which leaves fingertips aas nimble as possible. Minimized leather palm overlay wraps over the tips of fingers only, to limit weight and decrease dry time. Elastic wrist holds secure without tabs; loop on finger clips glove in upright position. Essential.