Gear Aid Aquaseal
Where to Buy
Help support Trailspace by making your next purchase through one of the links above.
Here's what other sites are saying:
Aquaseal Urethane Repair Adhesive is ideal for repairing holes and tears in dry bags, wetsuits, paddling apparel and latex gaskets. Waterproofs, seals and protects against abrasion.Aquaseal is the industry standard for maximum strength repairs to wetsuits, dry suits and all water sports products. It bonds to hypalon, neoprene, latex, nylon, vinyl (PVC), GORE-TEX and other trilaminates, many fabrics, foams, composites, and many plastics.It dries clear and flexible and is also self-leveling.Works great for replacing latex gaskets and for adding an abrasion-resistant layer on boats and other boating gear.Mix Cotol(TM) Accelerator and Cleaner with Aquaseal to shorten cure time. It's also a great cleaner for prepping surfaces for repair.Good tip: Aquaseal is a moisture-cure adhesive. To prevent the unused portion from hardening in the tube, follow these simple steps: Squeeze Aquaseal right up to the opening so there's no air pocket. Then put some vaseline on the threads before screwing on the cap. Now put the tube in a zip-seal bag and store it in the freezer. When you're ready to use the tube again, warm it at room temperature or in the bag in warm water and you're good to go!
Aquaseal Adhesive and Sealant can fix nearly everything. With it you can make permanent repairs to tears, holes and rips in wet suits, dry suits and most other watersports gear. Its super-strong formula seals and waterproofs equipment, and protects gear against abrasions. Aquaseal is part of a comprehensive line of Care and Repair products from Gear Aid. With Gear Aid, anyone can be a master of gear repair.
Repair wet suits, dry suits and all watersports products. Aquaseal(R) urethane rubber compound provides superior adhesion, wear resistance, flexibility and waterproofing. Unaffected by heat or solvents, Aquaseal cures to a flexible thermoset rubber product. Aquaseal can be stretched and folded yet still spring back to its original shape without any damage. Cotol 240 is a urethane cure accelerator and pre-cleaner to be used in conjunction with Aquaseal. Cotol-240 cleans and prepares the surface, readying it for Aquaseal, speeding the tack time to 15 minutes and the full cure time to under two hours. COTOL-240 is also ideal for removing tar, sap, glue and other resins from various surfaces, including glass, plastic and metal. Kit includes a 1-fluid ounce tube of Aquaseal, a 1/2-fluid ounce bottle of Cotol-240 and an applicator brush.
For use on wetsuits, drysuits, and other waterproof sports gear, Aquaseal and Cotol-240 from McNett is an ideal combination for sealing and protecting. Use the Cotol-240 cure accelerator and pre-cleaner to clean and prepare waterproof surfaces, readying it for the Aquaseal urethane rubber compound.
- Mountain Gear