Gore Fabric Repair Kit
Where to Buy
Here's what other sites are saying:
For quick outerwear fixes in the field, the McNett Gore-Tex(R) Fabric repair kit does the trick.
GORE-TEX- Fabric Repair Kit The essential field repair kit for all types of repairs including tents, sleeping pads, rainwear, backpacks, boots and more. Kit includes two adhesive backed GORE-TEX- fabric pressure-sensitive patches. Ideal for GORE-TEX and WINDSTOPPER- Fabric. Available in Black, Navy, Tan, Yellow, Red, Green, Woodland Camo & Desert Camo. Two patches per kit.Repair Kit Instructions: The patches supplied in this kit will provide a temporary water resistant repair for GORE-TEX- fabric products.Patches should be kept in sealed plastic bag until used.Area to be repaired must be clean and dry.Patch will not adhere effectively to loose debris, grease or oil.Patch should overlap tear by at least 1/2'' in all directions.Remove release paper from back of patch. Lay GORE- product on a smooth flat surface and apply patch using finger pressure (adhesive side down). Rub patch surface in a circular motion from the center out covering the entire patch area.Product can be used immediately; however, the adhesive will continue to strengthen over the next 12 to 24 hours.The durability of the patch can be enhanced by applying heat and moderate pressure. Use a clean iron and set to medium heat. Press with moderate pressure in a circular motion for 30 seconds.
- Mountain Hideaway
For quick waterproof repair of Gore-Tex garments. Pressure sensitive Gore-Tex patches made by W.L. Gore. Ideal for all Gore-Tex fabrics, garments and accessories, also works on outdoor fabrics of all kinds. Includes 1 round and 1 rectangle patch.
- Vargo Outdoors
Description of McNett GORE-TEX Fabric Repair Kit The essential field repair kit for all types of repairs including tents, sleeping pads, rainwear, backpacks, boots and more. Kit includes two adhesive backed GORE-TEX fabric pressure-sensitive patches. Ideal for GORE-TEX and WINDSTOPPER Fabric.
- US Outdoor Store
Two pressure-sensitive patches made from Gore-Tex fabric for repairing your Gore-Tex products.. . . . Provide a temporary, water-resistant repair for Gore-Tex fabric products. 2 x 4-inch rectangular patch and 3-inch-diameter circular patch. Can be used immediately; the adhesive will continue to strengthen over the next 12 to 24 hours. Durability of the patch can be enhanced by applying heat and pressure.