Patagonia Rubicon Rider Jacket
41.3 oz / 1171 g
2.4 oz 100% Polyester Ripstop / Deluge® DWR Finish
2 Layer, 5.6 oz 150-Denier 100% Polyester Waterproof/Breathable H2No® Barrier / Deluge® DWR Finish
|Lining / Powder Skirt Fabric||
2 oz 100% Polyester Plain Weave Insulation: 150 g Thermogreen® 100% Polyester, 90% Recycled
While the men's version hasn't been reviewed yet, there is 1 review for other versions of the Rubicon Rider Jacket. Read all reviews »
Where to Buy
Here's what other sites are saying:
When your riding takes you down the coldest of slopes, the Patagonia Rubicon Rider jacket delivers loads of warm insulation to keep you in your cozy comfort zone as you plow through the pow.
When the conditions are just too good to quit, you need the Patagonia Rubicon Rider Jacket. Not only will this jacket keep you warm, the waterproof protection ensures that you'll stay dry so you can ride the slopes until you can't see. Durable, polyester ripstop fabric is breathable and water-resistant 2-layer waterproof/breathable H2No(R) Performance Standard reinforcement panels over the shoulders, elbows and hem prevent wet-through and increase durability Lightweight, compressible 150-g Thermogreen polyester stays warm even when wet Removable helmet-compatible hood has an easy-to-use, single-hand adjustment Microfleece panels at back of neck and chin are soft next to skin Pit zips off-load heat; articulated arms increase mobility Removable powder skirt with snap secure webbing loop at center back, connects to any Patagonia(R) Snow pants to keep snow out Pockets: Two handwarmers, two chest, two internal drop-in for goggles and gloves, one internal zippered stash; includes secure media pocket with cable routing Improved, adjustable low-profile cuff design; drawcord hem cinches to keep out cold; drawcord exits into handwarmer pockets for easy adjustments
We make the Rubicon Rider for those whose shred style is driven by stoke, not hype. The Rubicon Rider manages the extremes of warm interior and cold exterior by combining a breathable and highly durable soft-shell fabric (to vent high-output moisture) with stay-warm-when-wet insulation (to keep you dry and mobile) and burly waterproof/breathable reinforcements (for storm protection). Made of supple 100% polyester ripstop, the shell has a DWR (durable water repellent) finish to snub wind and moisture. Inside, a soft layer of compressible Thermogreen(R) polyester (90% recycled) insulation adds heat to icebox temperatures. Tough 2-layer, H2No(R) Performance Standard panels, made of 100% recycled polyester with a waterproof barrier and a Deluge DWR finish, beef up the shoulders, elbows and bottom hem to increase storm performance and protect from abrasion. Finer points include pit zips, an easy-gliding liner, a zip-off powder skirt (with webbing loop that attaches to any Patagonia(R) snow pants), a removable, helmet-compatible hood with a single-hand adjustment and zippered pockets: two handwarmers, two chest (one with secure media pocket with cable routing), one internal drop-in and one internal stash. With an embedded RECCO(R) avalanche rescue reflector.
When winter sets in and the temperatures get really nasty, grab your Patagonia Rubicon Rider Jacket and brave winter's worst. The insulated Rubicon Rider comes complete with Patagonia's Thermogreen synthetic insulation (150g) for days when the cost of all that light, dry powder is frigid temperatures. Patagonia designed the Rubicon Rider jacket with 2-layer H2NO waterproof breathable panels in key areasshoulders, elbows and bottom hemto increase storm performance and protect from abrasion. The main body fabric is 75D polyester ripstop, which is both durable and soft to the touch, and features a Deluge DWR finish to allow it to shed light rain and snow. The removable, helmet-compatible, adjustable hood locks in warmth and features soft microfleece panels at the back of the neck and chin. Patagonia also equipped the Rubicon Rider with a sleek, low-profile powder skirt that stays in place whether secured or not. The powder skirt features a loop of nylon webbing that connects to any Patagonia Snow pants to form a single powder barrier. The Rubicon Rider jacket's fit is relaxed for easy layering. A slew of pockets keep your stuff (everything from climbing skins to your MP3 player) safe and secure while you lap the chair or a favorite backcountry shot, and zippered underarm vents make it easy to dump heat when you need to. Patagonia finished off the Rubicon Rider with a Recco reflector, which makes rescue easier if you're involved in an in-bounds avalanche.