Pieps iProbe

Average Rating: Not yet rated
Become the first reviewer

View Description
No Reviews
Write a Review
Compare Prices
View Similar Products
Save & Share

Description

The iProbe is an avalanche probe made by Pieps. It hasn't been rated yet. Be the first to write a review.

Here's what other sites are saying:

From Backcountry.com:
"The Pieps iPROBE Probe provides the missing link during searches for multiple avalanche victims. This probe uses a single AA battery-powered proximity detector to give you both audible and visual confirmations when you've located a transmitting beacon. The iPROBE will detect any brand of beacon, no matter what your friends are using. If the buried person has an iPROBE-supported beacon (such as the Pieps DSP or Freeride), you can actually temporarily turn off the transmitting beacon to go search for other beacons. The reduced interference could save valuable minutes. How does it work? When the tip of the iPROBE comes within two meters of a transmitting beacon, the iPROBE's LED lights up, and it emits a "peep, peep," sound. When the iPROBE is within 50 centimeters, the intermittent peeps become continuous ("peeeeeeep"). If the transmitting beacon has iPROBE support, you can hit a button on the probe to mark the location, turn off the beacon, and search for the next victim using your traditional transceiver and a second probe. Hitting the "mark" button again or removing the probe from the area causes the iPROBE-supporting beacon to turn on again."

From GearX.com:
"PIEPS iPROBE is the Missing Link in multiple avalanche burials"

From Tahoe Mountain Sports:
"Pieps iProbe is the world's first smart avalanche probe. This probe comes integrated with optical and acoustical indication on the handle, allowing you to easily pinpoint avalanche victims | Perfect tool for multiple burials, the iProbe can temporarily deactivate iProbe supporting beacons with the push of a button, allowing searchers to find the next strongest signal | LED illuminates when the tip of the probe is about 2 meters from the transmitting beacon | Continuous acoustic tone is emitted when probe tip is within 50cm of transmitting beacon | iProbe supporting Pieps beacons are deactivate by pushing MARK button on handle. Beacon can be reactivated by pressing button again or moving iProbe tip more than 50 cm from beacon | Note: We offer a firmware upgrade for older Pieps DSP beacons that includes iProbe Support"