DMM HB Brass Offsets
Where to Buy
Here's what other sites are saying:
The DMM Brass Offsets Stopper set delivers the 7 original sizes of the long-sought-after, but no-longer-available, Hugh Banner Brass Offset nuts.
Secure safe placement in cracks with the durable silicon bronze and silver casted HB Brass Offset Nuts from DMM. BUy this set so you can bring all 7 sizes to the crags and know you're grabbing the appropriate one each time - identify each by the color-coded swage treatment on the stainless wires.
- Mountain Gear
The HB Brass Offsets offset micro wires developed a fanatical following and after re-introducing the larger alloy Offsets 12 months ago we were inundated with requests to start manufacturing the smaller brass offsets. Their popularity is because their unique shape allows climbers to protect pitches that are otherwise not viable. Pin scars take this passive piece of protection well. The finished product took longer to bring to market than predicted, but we had to completely rethink the manufacturing process whilst also maintaining the original design specification. The units are are manufactured from a very specific quality of 'brass' that is silver soldered onto stainless steel wire. Every unit is proof loaded to 75% of its rated strength. The wires benefit from a colour coded alloy swage that is only dinked on one side i.e. one wire runs free so that the head is always loaded optimally. The colour coded swage helps with selecting the right size first time. #0/4g/2kN/Gold #0/7g/4kN/Blue #0/9g/5kN/Red #0/10g/5kN/Grey #0/14g/7kN/Purple #0/17g/7kN/Green #0/24g/10kN/Silver Note that this item of climbing safety equipment is non-returnable. Please call us toll free at 877-236-8428 or e-mail firstname.lastname@example.org with any questions.
Look no further than DMM's Brass Offset Free Package when you're climbing through a series of micro-placements and not much else. These three brass stoppers boast a high breaking strength to give you peace-of-mind when you're running it out. Their offset heads make it easier to place in flared fissures, and the aluminum swages flex for the fall and bend back in place for the next route's whipper.