Metolius Stainless Steel Bolt Hanger
|Bolt hole fits||
3/8 in / 10 mm bolts or 1/2 in full-sleeve bolts
Radial 25 kN / 5620 lbf
Where to Buy
Here's what other sites are saying:
You've probably already clipped into a Metolius Stainless Steel Hanger at your local crag without even knowing. The Metolius S.S. Hanger is made of stainless steel and is CE/UIAA approved. Available for first ascents, first descents (caving) and re-bolting worn hangers. Designed for belay use, rescue and rigging work, and protection points if necessary Constructed of 304 stainless steel 4 mm (0.15 in) thick Rounded edges won't damage carabiners Clip-in point is big enough to accommodate 2 carabiners Bolt hole fits 3/8 inch (10 mm) bolts or 1/2 inch full-sleeve bolts Strength: radial 25 kN (5620 lbf) CE/UIAA approved
Metolius Stainless Steel Bolt Hanger FEATURES of the Metolius Stainless Steel Bolt Hanger 304 stainless steel Coined radius on the carabiner-bearing surface means these hangers won't ruin carabiners Bolt hole fits (3/8in. / 10 mm) bolts or 1/2in. full-sleeve bolts Meets CE/UIAA standards Not for use in marine environments The SPECS of the Metolius Stainless Steel Bolt Hanger Thick: 0.15in. / 4 mm Strength: 25 kN / 5620 lbf ALL CLIMBING SALES ARE FINAL.
The Stainless Steel Bolt Hanger from Metolius is designed for belay use, rescue and rigging work, and protection points if necessary.
- Mountain Gear
This popular hanger can be bolted directly to the rock for fixed pro on established routes. Oversized carabiner hole is big enough for 2 'biners. Fits 3/8'' bolts or 1/2'' full-sleeve bolts. Minimum breaking strength is 5,000 pounds in shear or pull out.