Metolius Monster Daisy Chain
Here's what other sites are saying:
Once you've ascended as high as possible, attach one end of the Monster Daisy Chain from Metolius to your harness and the other end to your top-most anchor placement so that you can hang from the chain while preparing your next moves and anchor placement. The twelve 3-inch triple-bar-tacked pockets allow you to fine-tune the distance from you to the anchor so that you get the best possible reach for your next placement.
- Mountain Gear
The lean and strong Metolius Monster daisy chain can be used for ascension rigs, leading aid pitches and sorting out complicated belays. Made with Monster webbing, a blend of 36% Dyneema and 64% nylon for superb strength-to-weight ration and abrasion-, UV- and moisture-resistance. Thin 13mm width daisy chain weighs a scant 2.5 oz. and features a reinforced clip-in loop and an 8-in. loop for girth hitching to climbing harness. Long 55-in. chain is triple bar-tacked between pockets; 3-in. pockets are designed for body weight only! Ideal for alpine climbing because it absorbs very little water. Different loops allow climber to clip in at varying lengths from protection. Daisy chains are intended for body weight applications only.
Metolius Monster Daisy Chains can be used for rigging jumars, leading aid pitches and sorting out complicated belays. Metolius added high strength/low weight monster-webbing to make this classic piece of gear even better. DAISY CHAINS ARE INTENDED FOR BODY WEIGHT APPLICATIONS ONLY! Strength: End-to-end: 15.5 kN (3500 lbf) Pocket: 1.3 kN (300 lbf)