CAMP HMS Belay Lock
Here's what other sites are saying:
The HMS Belay Lock Carabiner from C.A.M.P. features a small inner gate that closes over the belay loop once the biner is in its optimal position for belaying or rappelling.First, attach the biner to the belay loop and let it close. Second, open the small gate and insert the belay loop. Third, open the main gate to its full position to fully compress the small inner gate and insert your belay device and rope and the same time. Tighten the screw gate.
Cross-loading your belay carabiner can be very dangerous, That is why Camp created the HMS Belay Lock carabiner that has an extra arm to make sure the carabiner stays where you put it. Feeding off of the main gate's spring, the secondary gate firmly spans the carabiner and secures itself into two dimples along the spine to anchor the orientation of the biner. The HMS shape gives you plenty of room across the top to handle a rope and tie off if needed.
- Mountain Gear
CLOSEOUTS . The C.A.M.P. HMS Belay Lock carabiner can be used for belaying and rappeling, and features a patented design that locks the carabiner in place on the belay loop to help prevent cross-loading. Available Colors: BRONZE.
- Sierra Trading Post
One of the flagship products of CAMP USA's gear array, the HMS Belay Lock Carabiner features a patented design that locks the carabiner in place on your belay loop to help prevent dangerous cross-loading. This inner-gate design boasts an intuitive design that extends to either side of the 'biner spine for full security. With both gates utilizing the same spring, the HMS Belay Lock saves weight and attaches with ease.
The CAMP HMS Belay Lock Carabiner features a patented design to lock the carabiner in place on the belay loop and prevent dangerous cross-loading. In addition to the patented inner gate the carabiner features a keylock closure for snag-free clipping. Patented design locks the carabiner in place on the belay loop to prevent dangerous cross-loadingInner gate extends entirely from side to side for maximum securityInner gate uses the same spring as the main gate and locking "dimples" on the spine of the carabiner to keep it closedKeylock closure for snag-free riggingWeight: 2.7oz (75g)Strengths:Major Axis: 23kNMinor Axis: 8kNOpen Gate: 8kN