Omega Pacific 1/2" Steel Modified D NFPA Screw-Lok

Manufacturer's Description

Visit Omega Pacific's 1/2" Steel Modified D NFPA Screw-Lok page.

Retailers' Descriptions

Here's what other sites are saying:

Designed for rescue work, this 1/2-in. modified-D steel carabiner has a strength rating of 65kN (that's over 14,000 pound-force units).. . . Locking gate with 22 mm gate opening. Length: 113.3 mm (4.46 in.). Width: 68.6 mm (2.7 in.).


Same "D" shape as the 7/16" model, but with bigger material for increased strength. Same great handling and use characteristics but with a strength rating of 65 kN (that's over 14,000 lbs.!).

- Altrec Outdoors

*Manufactured by Omega Pacific with certified heat-treated 1/2" alloy-steel to ensure high strength and dependability. *Exceeds NFPA/ANSI/OSHA strength requirements *Gate Opening: 23mm *Material: 1/2" Steel *Strength: 65kN *Weight: 263 gm

- Vargo Outdoors

Trust your weight to the heat-treated, 1/2-inch alloy-steel strength of Omega Pacific's Modified 1/2-inch Steel Screw-Lok D carabiner that exceeds NFPA strength requirements. Handle ropes easily - the D shape, ample gate opening, and screw lock keep operation streamlined.

- Mountain Gear

Omega Pacific 1/2" Steel Modified D NFPA Screw-Lok


The Omega Pacific 1/2" Steel Modified D NFPA Screw-Lok is not available from the stores we monitor. It was last seen October 24, 2016 at Mountain Gear.

If you're looking for a new locking carabiner, check out the best reviewed current models.

Recently on Trailspace

Granite Gear Air Zippditty Review

Gregory Baltoro 65 Review

MSR Evo Ascent Review

Appalachian Trail Conservancy The A.T. Guide (2016 Northbound) Review

Trailspace in Glacier National Park

Sky Line Trail Snow Shoe